Main characteristics

– Very low power consumption
– Structure with aluminium proles and panels in sturdy galvanised sheet
– Epoxy powder painted
– Electronic management of defrosting
– It can be ducted
– Rated average power consumption 12000 W
– Air flow  7600 mc/h
– Suond pressure level  72 db(A)
– Refrigerant  R407a
– Weight   250 Kg


The dehumidifiers HIGH EFFICIENCY SDV series are high performance. This machine is a special dehumidifier capable of controlling temperature and humidity. E ‘equipped with a particular system of heat recovery between downstream and upstream of the evaporator where the effect is able to reach very low levels of relative humidity, and also has a superior energy efficiency of 30-60% compared to the traditional dehumidifier .


FRAME Structure with aluminium profiles and panels in sturdy galvanised sheet, painted with epoxy powder ensuring high resistance to atmospheric agents and aggressive environments. The panels are sandwich and removable to allow a quick inspection and maintenance of the internal parts.

COMPRESSOR Compressor scroll mounted on vibration dampers. Provided with resistance on the housing and thermal safety.

REFRIGERANT CIRCUIT : Evaporator and condenser: the coil is made of copper pipes and aluminium fins. Drying filter, Shrader valves, minimum and maximum pressure switch. Defrosting thermostat and solenoid valve in version S.

CENTRIFUGAL FAN Centrifugal double suction fan, built with sturdy blades in galvanized sheet, statically and dynamically balanced. Two-speed fan.

CONDENSATE COLLECTION TANK : The tank is in non-corrosive stainless steel, the dehumidifier should be connected to a fixed drain, preventing the formation of double siphons. Attach a tube with 3⁄4″ F coupling to the welded fitting of the tank


IP Standard IP21. On request IP44 (optional).

OUITSIDE UNIT The remote condensers are made of copper pipes and aluminium fins. The diameter of the copper pipes is 3/8” and the thickness of the aluminium fins is 0,1 mm. The tubes are mechanically expanded into the aluminium fins to improve the heat exchange factor. The geometry of these condensers guarantees a low air side pressure drop and then the use of low rotation (and low noise emission) fans. The fans are axial type with aluminium aerofoil blades complete of the safety fan guard. The protection class of the motors is IP 54.

FAN Centrifugal double suction fan, built with sturdy blades in galvanized sheet, statically and dynamically balanced. Protection degree: Three-speed fan.

MICROPROCESSOR Controls the defrosting cycles, the compressor timer and the alarm card. The dehumidifier is equipped with step sequence control and electronic control 0-10 V (optional) or on/off of the outside unit.

AIR FILTER The air filter G4, supplied as standard with the unit, is washable and easily replaceable. It is in Polyurethane and High-efficiency filter.

TESTING Tests are performed to check the tightness of the refrigeration circuit. Electrical discharge tests and functional tests are performed as well.

TECHNICAL STANDARDS This dehumidifier meets the essential requirements included in the Directives of the European Community 2006/95/EC of 12 December 2006 on the safety of electrical products for use in Low Voltage; 2004/108/EC of 15 December 2004 in the field of electromagnetic compatibility; 2006/42/EC of 17 May 2006 in the fields of machinery safety. The conformity is declared with reference to the following harmonized technical standards: CEI-EN 60335-2-40, CEI-EN 55014-1, CEI-EN 55014-2.

We also declare that the product is manufactured in compliance with the RoHS Directive in force, that is 2002/95/EC, transposed with the Legislative Decree of 25 July 2005 no. 151 (article 5).


• 0-2901-6928 ต่อ 19
• 081-991-0982 ต่อ 19
• 089-923-8122 (คุณปลา)
• 062-356-9226 (คุณเอ้ก)
• 098-750-0714 (คุณวิ)
FAX (Office) • 02-901-5850

ที่อยู่บริษัท / ศูนย์บริการ / คลังสินค้า

59/888 ถนนเลียบคลองสอง ต.คลองสอง อ.คลองหลวง จ.ปทุมธานี 12120